Militaria-Reisig & Antiquitäten - Top
Display your banner here
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Restoring a bayonet

Article about: by Walkwolf K98k bayonets are relatively common, but it is worth something. If the serial numbers ( '5430 c' ) on the scabbard match that of the bayonet, it will be worth more than a mis-mat

  1. #1

    Default Restoring a bayonet

    When my grandfather died i received a world war 2 bayonet. I was told it was german made. I can make out 2 numbers on the base of the blade, one on either side. I was wondering what the best way to restore the value of the bayonet was. I realize that there are probably alot of these out here, but anything i can do would be helpful. I was thinking like sharpening the blade, or varnishing the handle, shining the holster, etc. Im new at this so i dont know whats best to do. The blade looks pretty worn as well.

  2. # ADS
    Circuit advertisement Restoring a bayonet
    Join Date
    Always
    P
    Many
     

  3. #2
    ?

    Default Re: Restoring a bayonet

    Hi,post some pictures showing the numbers and scabbard too,in the meantime do none of the things you have mentioned as this will destroy any collector value.
    JEDEM DAS SEINE

  4. #3

    Default Re: Restoring a bayonet

    Quote by zwerge View Post
    Hi,post some pictures showing the numbers and scabbard too,in the meantime do none of the things you have mentioned as this will destroy any collector value.
    Ahh, alright. I figured restoring it to a better condition would increase the value.

  5. #4

    Default Re: Restoring a bayonet

    As said, any of the treatments you were thinking of will ruin any potential value.

    Best to post some photos and let the good folks here take a look at it.
    There may only be wear - which is quite normal - or surface rust
    which can be removed without harm.........
    Regards,


    Steve.

  6. #5

    Default Re: Restoring a bayonet

    Quote by Walkwolf View Post
    As said, any of the treatments you were thinking of will ruin any potential value.

    Best to post some photos and let the good folks here take a look at it.
    There may only be wear - which is quite normal - or surface rust
    which can be removed without harm.........
    Will do . I only have webcam photos, is that sufficient?

  7. #6

    Default Re: Restoring a bayonet

    Lol, at least we'll be able to tell you what country it's from.
    Quality photos from a digital camera are best,
    but post what you have.........!
    Regards,


    Steve.

  8. #7

    Default Re: Restoring a bayonet

    Attachment 356970Attachment 356971Attachment 356972Attachment 356973
    number 1: 5430 C
    number 2: s/245

    Edit: Thats the best i got. Any other shots or angles that you need just lemme know.

  9. #8

    Default Re: Restoring a bayonet

    '5430 c' is the serial number, and 'S/245' is the maker. It is a pre-WWII
    Third Reich K98 bayonet made by 'J. Sch'.

    There will be a date on the spine - the top flat side - of the blade,
    near the crossguard. Likely '36' or '37'.

    From the photos, I'd be apt to leave it be. If you want to
    remove some of the rust, rub some light oil on the metal
    parts with a cloth and it will come up a bit.........
    Regards,


    Steve.

  10. #9

    Default Re: Restoring a bayonet

    Quote by Walkwolf View Post
    '5430 c' is the serial number, and 'S/245' is the maker. It is a pre-WWII
    Third Reich K98 bayonet made by 'J. Sch'.

    There will be a date on the spine - the top flat side - of the blade,
    near the crossguard. Likely '36' or '37'.

    From the photos, I'd be apt to leave it be. If you want to
    remove some of the rust, rub some light oil on the metal
    parts with a cloth and it will come up a bit.........
    Is it worth anything? Or just a common collectors item.

  11. #10

    Default Re: Restoring a bayonet

    K98k bayonets are relatively common, but it is worth something.
    If the serial numbers ( '5430 c' ) on the scabbard match that of
    the bayonet, it will be worth more than a mis-matched set.
    They sell on ebay all the time.

    Condition is a factor, but it should be worth more to you
    as a family heirloom.........
    Regards,


    Steve.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Restoring a M35

    In Restoration & Refurbishing
    06-01-2015, 04:06 AM
  2. Restoring a M42 helmet

    In Restoration & Refurbishing
    01-01-2012, 10:59 AM
  3. Restoring Bouncing Betty

    In Ordnance and ammo
    03-27-2011, 09:55 AM
  4. German ww1 belt restoring

    In Restoration & Refurbishing
    02-27-2011, 05:36 AM
  5. SS skull restoring prongs

    In Restoration & Refurbishing
    10-26-2009, 10:39 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Wardmilitaria - Down
Display your banner here