My 1/35 Tamya sd.kfz. 251
Article about: Hi. This is my attempt at model making. However, im not very skilled in these hobbies, i doubt it would as good as most models shown here. Cheers. Nuno
-
-
Re: My 1/35 Tamya sd.kfz. 251
I would paint over the tyres with a matt black and I suspect it's too late, paint the tyres on the rest of the wheels before assembly. In fact I paint almost all of the pieces before I assemble them. I would also change the interior seat cushions to Tamiya's red brown colour.
Looking for LDO marked EK2s and items relating to U-406.....
-
Re: My 1/35 Tamya sd.kfz. 251
by
Adrian
I would paint over the tyres with a matt black and I suspect it's too late, paint the tyres on the rest of the wheels before assembly. In fact I paint almost all of the pieces before I assemble them. I would also change the interior seat cushions to Tamiya's red brown colour.
The front wheels came out too shiny, matt paint would be better, and my hands were shaking quite badly when i did it.
The rest was painted before assembly.
-
Re: My 1/35 Tamya sd.kfz. 251
by
NunoGTI
That is outstanding Adrian.
Im afraid, i lack the talent to make something like yours.
Cheers.
Nuno
Hi Nuno,
Keep at it mate, you will get there sooner or later, we all have to start somewhere. Dont be scared to ask for help or idea's/suggestions etc, we will help where we can.
Personally, I've got some photos of some of my model figures posted somewhere on the model making forum side of WRF, as have quite a few of us.
@Adrian: Nice looking model there mate.
Regards etc
Ian D
AKA: Jimpy
-
Re: My 1/35 Tamya sd.kfz. 251
Looking good so far Nuno. I paint most intereior parts before assembly, but the main body always gets painted when it is completely built. I find this much easier.
You don't need much talent to make these models look good, you only need to learn some techniques, such as washes and dry brushing. Those two alone enhance a finish tremendously.
Tom
-
Re: My 1/35 Tamya sd.kfz. 251
by
Adrian
I would paint over the tyres with a matt black.
@Adrian:
Personally, I tend to paint tyres, and rubber rimmed wheels in general, a very dark shade of grey,shade them with black and drybrush them a couple of shades lighter grey.
Regards etc
Ian D
aka: jIMPY
-
Re: My 1/35 Tamya sd.kfz. 251
I agree with Ian. Black is far too dark for tyres in this scale. As far as the tracks go, a nice rusty brown colour, minimal drybrushing with a bit of silver mixed with some black and a touch of dark grey on the rubber pads. If you have an airbrush you can overspray the lower chassis and wheels with a nice light tan for a dusty look. Experiment on the sprues to see how different techniques look.
Waiting to see the finished product. Many of my first models were entirely brush painted.
Tom
-
Re: My 1/35 Tamya sd.kfz. 251
Nice model Adrian. What did you use for the foliage?
Tom
-
Re: My 1/35 Tamya sd.kfz. 251
Good advice there from Ian and Tom, thank you for the comments too! The foliage is just ordinary moss pulled off a tree trunk. It looks ok from a distance but doesn't stand up to close scrutiny.
Looking for LDO marked EK2s and items relating to U-406.....
-
Re: My 1/35 Tamya sd.kfz. 251
I dont know if any of you have tried this before, provided all wheels work plus tracks etc, take a piece of flat cardboard or wood, cover it with a wet mud solution and run the wheels through the mud, let it dry and if need be take a paint brush and gently take away the excess , you're left with authentic dirt covered wheels and tracks, you can also seal the dirt on by a gentle spray of flat sealer, this saves you from actually painting mud colours on, if the wheels are fixed, paint the mud on and follow up with the other processes
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks