Just going back to the .303's nobody appears to have mentioned the Canadians fighting in the Bulge (apoligies if I missed it!). The 1st Canadian Parachute Battalion (Can Para's) fought in the battle.
Just going back to the .303's nobody appears to have mentioned the Canadians fighting in the Bulge (apoligies if I missed it!). The 1st Canadian Parachute Battalion (Can Para's) fought in the battle.
Thanks Andris,
I got the proof of it this sunday, I went on a hunt in the same place with my buddy Bunghole and found another panzerfaust, but he was broken.
The warhead (60) broke open and there was the cone.(the flat nosed cones are the top of the warhead)We also found another 4 cones, a few tailsections and bits and pieces of the tubes.
2 30.call cartridges, 1 7,92mm and a verry small bottle marked SandoZ. I will post pictures this evening.
Ps: The wife came along and found a piece of a US telephonewire spool(DR-8)
Grtz Steven
Last edited by WW2Hunter; 01-31-2011 at 12:39 PM.
I will send you a pm asap. But for a B&B in the ardennes try this site it has English translation on request: Bed and breakfast en charme hotels, Weekend in de Ardennen.
Grtz Steven
Sorry for the delay on the pictures so here we go.
2 cones from a panzerfaust.
the broken warhead.
the little bottle with the .30 call for size.
A round piece of alluminium with green paint on it.
If someone has an idea about it?
A piece of a telefoon wire spool?
A casing same dimensions as 7.92 but no p code there it is marked F s67 7 15,
think belgian Mauser but I'm not sure.
Just love this place, always something to dig up...
These pictures are from last tuesday, had the day off so couldn't resist to go back.
I'm still digging in the same area where I found the panzerfaust, got enough places to keep me bussy digging for a good year and the local's are realy friendly.
I did some nice finds.
2 20MM casings marked RH 20MM 1944 and 1943.
1 Panzerfaust warhead, badly damaged.(it will be destroyed next week by the EOD)
26 casings .30 call
1 .50 call
The rest of the items in the pictures, I got them from a farmer I met that day.
4 AP .30 call (i have deactivated them) 1 I cleaned completly but it removed the black paint on the tip.
2 tubes for 60MM mortar shell, they are in great shape. The lot number is still on them.
5 7.92 cartridges 2 brass, 3 steel, one from 39 with roman number, two from 44 with the green lacquer still on them.
I hope you will enjoy the pictures.
Regards,
Steven
Some nice finds there You can clean the 30s without removing the black paint. I have done this on numerous occasions and do it by placing tape over the very tip of the projectile and then following the usual cleaning procedure. Saying that, I think they look better in reic condition
Just in case you didn't know, your Roman numerals refer to the plating and lacquering companies. If you look at my pinned thread on headstamps in the ordnance forum it explains them there
Oh, and the mortar transport tubes are awesome !
Cheers
Steve T
Thanks for the kind words, Steve.
I will try the technique with the tape in the future (do you use masking tape?) and thanks for the headstamp info.
I cleaned this one up because I didn't have it in my ammunition collection yet.(I will add the black tip again later on)Thanks to a new law every cartridge must be deactivated by drilling a hole on the side at the base (even for used cartridges), this realy break's my heart.
The rest of them go's in the relic section of my display.
These tubes were in a hayloft for nearly 65 years and just cleaned them up with a very soft paintbrush.
I like them a lot and they will be a great addition to my small relic collection.
Grtz,
Steven
Steven
I do use masking tape yes, but try it on a 'tip' that is already in bad shape first, just to make sure the paint doesn't come away with the tape.
I know what you mean about drilling holes but, so long as you do it carefully it doesn't look too bad. It's better to drill holes than to lose the lot if the authorities come round and confiscate it all and chuck you in jail !
Cheers
Steve T
Thanks for the advise on the tape Steve, I will do so.
I've just ordered the smallest steel drill-bits I could find(1 and 2mm). They didn't specify how big the hole must be
Grtz,
Steven
Similar Threads
Bookmarks