Great Militaria - Top
Display your banner here
Results 1 to 1 of 1

US Medal Brooch pin types

Article about: Hello guys! here is something nice that i found in the net (please, let me know if any information here is wrong): A Basic Guide of US medals - brooch tipes: For a beginning collector of U.S

  1. #1

    Default US Medal Brooch pin types

    Hello guys! here is something nice that i found in the net (please, let me know if any information here is wrong):

    A Basic Guide of US medals - brooch tipes:

    For a beginning collector of U.S. Medals, a basic understanding of Brooch Styles is necessary to determine your medal's age. This guide is meant to give a basic knowledge of brooches, and their relative ages. Exact dates of issue do change from medal-to-medal, and they do overlap, as stocks of older style brooches were used up when a newer style was introduced. First of all, the Brooch is the metal part of the medal suspension with the pin upon it for affixing the medal to the uniform. On U.S. Medals, it is found on the reverse top of the ribbon, with the exception of those medals intended to be worn about the neck (WWII-issue and onward Congressional Medals of Honor, Legion of Merit Commander, and the Presidential Medal of Freedom to name a few), or are pinback (Legion of Merit Chief Commander, for example). Illustrations of the various types of brooches are found at the end of the article to help illustrate the Brooch styles discussed. There are three basic styles of Brooches - Wrap, Slotted, and Crimped. If not stated, or obvious, you should ask the seller which kind of brooch the offered medal is suspended from.

    Wrap Brooches are the earliest style of Brooches, and can be sub-divided into two basic types - Split Wrap and Full Wrap. In Wrap Brooches, a single solid bar of brass literally wraps around the ends of the ribbon. It is the style of brooch that is correctly found on found on period-manufacture Pre-WWII U.S. Medals. The earliest versions of Wrap Brooches are the Split Wrap variety. Full Wrap Brooch stocks ran out sometime in 1942. Thus, only very early issue WWII medals will be found on Full Wrap Brooches.

    Slotted Brooches have a slot in the top of the plate to allow the ribbon to pass thru. There will also be two small holes found in the bottom of the Brooch that are used to sew the bottom of the Brooch to the ribbon. It was introduced, as a more economical, and practical way to attach the pin plate to the medal ribbon. It is the second-oldest style of Brooch, and is generally found on WWII-manufactured U.S. Medals. They were used from approximately 1920 until at least 1963. These dates are based upon the oldest (WWI Victory Medal), and the most recent (Air Force Good Conduct Medal) medals I have observed with a slot brooch suspension. This means only the very earliest production WWII Campaign and Victory Medals (which were first manufactured in 1947) will be found with Slotted Brooch suspensions. There also exists a sub-variety known as a Bent-Slot Brooch, where the pin plate is bent horizontally. This is only found on a few WWII-manufactured medals, primarily very early Purple Hearts.

    Slotted-Crimped Brooches are transitional Brooches. In this Brooch, a back plate is crimped over an end-of-stock Slot Brooch pin plate. The holes at the bottom of the Slot Brooch pin plate may be covered up by the back plate's bottom crimp edge, but the slot at the top is quite visible under the top crimp edge. In the few of this style of brooch I have examined, a third spacer plate (as found with the standard Crimped Brooch) is not used. This style of Brooch was very short-lived, starting late in 1943, and ending production possibly as late as 1963 (see dates of Slotted Brooch production in above paragraph), when the supply of Slot Brooch pin plates finally ran out. An Armed Forces Reserve Medal on Slotted-Crimped Brooch would indicate a medal produced during its first year of authorization. Another medal commonly found on this style suspension is the Medal for Humane Action (the Berlin Airlift Medal).

    Crimped Brooches are the most commonly seen style of Broches. It is a two-piece Brooch with a rectangular metal plate with the pin upon it, and a second metal plate set behind the pin plate, with the ends of the ribbon betwen them, and the edges of this back plate bent over, or crimped, over the top and bottom edges of the pin plate. There may also be a third metal plate found under the pin plate, and over the ribbon ends. This style of Brooch came into use during WWII (late 1943 onward). The WWII version Crimped Brooches are slightly wider than the modern Crimped Brooches seen on medals made after 1947-9, as the early crimp plates were made to fit around the existing supply of Slot Brooch pin plates.
    Attached Images Attached Images US Medal Brooch pin types  US Medal Brooch pin types  US Medal Brooch pin types  US Medal Brooch pin types  US Medal Brooch pin types  US Medal Brooch pin types  US Medal Brooch pin types 

Similar Threads

  1. Painted DRK Brooch: Late Piece? Maker?

    In Non-Combat Uniforms and related insignia of the Third Reich
    09-06-2011, 04:42 PM
  2. Mutterkreuz brooch..???

    In Orders & Decorations of the Third Reich
    06-09-2011, 09:33 PM
  3. Help please - Buckle converted to brooch

    In Imperial Germany and Austro-Hungary
    11-29-2010, 07:42 PM
  4. DFC_Wrapped Brooch

    In Orders, medals and decorations
    05-16-2010, 12:54 AM
  5. Patriotic Brooch & Cross

    In Orders, medals and decorations
    12-31-2009, 05:02 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Rg-militaria - Down
Display your banner here