The decals are bad so that is not a good start. Not to sure about the shell either. The stamps seem to me to be too deep - RZM stamps are usually lightly struck and the circles are usually very light to non existent at the 12:00 O'clock and 6:00 o'clock areas. Are there washers on the interior of the lugs? Not one with which I would be comfortable. Overall, if I were you I would get a refund if possible. Sorry, Jim G.
the SS and RZM stamps have fading and are both lightly struck i took pictures with the flash on so that might explain it. I had this helmet checked out by multiple collectors and they all gave it a thumbs up. But i came here for people to have an opinion about it. What does not look right on the decal?
The graphics of both decals are way off. For instance, the bottoms of the runes are above the break - not found on original the Pocher runic decal that this one attempts to copy. The materials used to make this decal clearly are not right. The disc on the party shield is oversized. It appears to be an effort to copy the Austrian Party shield found on a few original SS transitionals, but this one is not one of those. To me, both decals are one look reproductions with too many graphic errors to list. Regarding the shell, straight on and profile pictures of your shell would help so we can see if the front rivets line up with the lugs properly. With RZM shells the rivets are higher and closer to the lugs than those on standard M18 shells. Also, I would like to see a picture of the interior of the vent lugs to see of there are washers . If so, the shell is NOT an RZM for sure. With real RZM shells, as with most, if not all inter War commercially produced M18 type clone shells, there aren't washers on the interior of the lugs. From what I see in the pictures provided I am sure the decals are bad and I have serious questions about whether the shell is really an RZM. Better pictures will tell the story. Just my observations. Jim G.
Last edited by helmet2id; 11-03-2017 at 01:36 AM.
Here are some pictures for comparison. The first few show the position of the rivets versus the lugs on an RZM shell as compared to a WWI produced M18 shell. The next few show typical RZM and SS stamps - very much lighter than those on the thread starter. The next few decal shots are of Pocher runic shields on Black Transitional SS helmets (both are droop bill shells, not RZM shells, but these are correct Pocher decals). The last shot is the Party shield on on of the Black SS transitionals. I hope these shots help explain my concerns with the thread starter. Jim G.
Last edited by helmet2id; 11-03-2017 at 01:38 AM.
the end of the rune is not sharp it is sort of round
These decals are fakes. Not the Pocher style decals you would expect on shells like this.
Similar Threads
Bookmarks